Stitch and glue is a simple boat building method which uses plywood panels stitched together, usually with copper wire, and glued together with epoxy resin.this type of construction can eliminate much of the need for frames or ribs. plywood panels are cut to shape and stitched together to form an accurate hull shape without the need for forms or special tools.. Practically all stitch and glue boats are given a sheathing of fiberglass cloth soaked in epoxy re.... Stitch-and-glue construction, along with the development of epoxy and modern mahogany marine plywood, has revolutionized and revitalized wooden boat building. this method of building is not only stronger, lighter, and faster than traditional wooden boat building, but it also takes far less skill. with stitch-and-glue construction, no strongbacks, forms, or temporary frames are required to.
Epoxy makes stitch and glue possible because of its strength. although some builders (such as dynamite payson) sometimes used polyester resin most amateur stitch and glue boat builders use epoxy. unlike polyester and hardener catalyst, epoxy is almost odourless and can be used inside. epoxy comes in 2 parts that have to be mixed in exact. Practically all stitch and glue boats are given a sheathing of fiberglass cloth soaked in epoxy resin. this layer is used to add a high degree of protection, strength, abrasion and impact resistance. the lower cost chopped strand mats will add bulk and stiffness but not much strength... Basic "stitch-and-glue" manual this manual describes the building of a small boat by the "stitch-and-glue" method, also known as "taped seams". the method originated in england in the early 60's and the first boat built was a mirror dinghy designed by jack holt. in traditional boatbuilding the builder needs to transfer.
0 komentar:
Posting Komentar